Simple Collecting syslog by Kiwi Syslog

a. Installing Kiwi Syslog Daemon
I use Kiwi Syslogd 8.2.18 for this setup. Please install Kiwi Syslog daemon untill you find this view.
b. Install Syslog service and Start syslog service.



c. Configure Router/Switch

Switch#conf t
Switch(config)#logging (Server IP Address)
Switch(config)#logging trap informational
Switch(config)#exit

For trap mode, you can choose trap mode. Here are 8 modes trap
<0-7> Logging severity level

alerts Immediate action needed (severity=1)
critical Critical conditions (severity=2)
debugging Debugging messages (severity=7)
emergencies System is unusable (severity=0)
errors Error conditions (severity=3)
informational Informational messages (severity=6)
notifications Normal but significant conditions (severity=5)
warnings Warning conditions (severity=4)

You can try if your syslog working or not by enter command clear counter
Switch#clear counter
Switch#

Now, you can sse at your syslog.